***

***

Friday, December 13, 2013

Tips, tricks, and tools

I don't know how many of you have wire fences around your property, but here's a handy little splicing tool to make putting one up to keep out the zombies a whole lot easier!

A Wire Splicer



The neatest and strongest splice can be made with this little instrument. It is a strip of iron 1 inch wide and 1/8 inch thick. One end is cut narrow and is bent into a hook large enough to fit neatly the largest wire to be spliced. At the sides of this two notches are filed, as shown at the left. At the right the splicer is seen in position on the wire. The splicer should be turned backward, as it appears in the right-hand drawing, to make the splice. A pair of large pincers or a vise should be used to hold the two wires between the coils while turning the splicer. The splice as finished appears above. The length of the handle may vary. If the splicer is to be used for net wire, of course the handle cannot be longer than the width of the mesh. Otherwise, 6 or 7 inches is about right for No. 8 wire. If it is to be used only for small wire, the length of the handle should be reduced for the sake of convenience.


More great 'old timer' tips and tricks at:http://journeytoforever.org/farm_library/device/devicesToC.html

No comments: